Miro Invests in Servo Press Technology

Posted on: 2017-09-18 03:58:22

servo press capabilities

Miro Manufacturing continues its development in contract manufacturing with the purchase of a Komatsu H2W300 330 ton servo press. The press will be outfitted with a CWP ServoMax 36” feed line. Scheduled to be operational in the 4th quarter of 2017, the new equipment will complement Miro’s current battery of metal stamping presses which range in tonnage from 60 to 1,000.

A Komatsu servo press is a complete integrated press system which utilizes technology to improve the entire stamping process. There are three key differences between servo and mechanical presses – accuracy, repeatability and power. Stroke, slide motion, slide position and speed are all programmable and adjustable.

Servo press technology benefits the stamper and in turn its customers.

Servo presses enhance productivity by

  1. Optimizing the speed a die can be run at
  2. Their ability to dwell for processes such as in die tapping and part or
    fastener insertion and
  3. Increased die life

Servo presses decrease production costs by

  1. Minimizing material usage
  2. Lowering tooling costs since more work can be done in fewer stations and
  3. Reduced press maintenance and energy costs

Miro, a diversified contract manufacturer, also offers fabrication, machining and assembly services all of which are supported by a full service on-site tool room. As Miro President, Jeff Brown, says, “tool & die is the company’s DNA”. The company partners with customers from product design through the manufacturing of parts, sub-assemblies and complete products.

Other News Articles

Miro Invests in Servo Press Technology

Miro Manufacturing has entered the world of servo press technology with the purchase of a Komatsu 330 ton servo press. The investment enhances Miro’s position in metal stamping and contract manufacturing.


Miro Featured in Accurate Die Design Software Ad

A Miro die design is the center of attraction in an Accurate Design ad appearing in MetalForming magazine.


Miro Manufacturing Hits the Cover of Stamping Journal

The story of Miro, the big press metal stamper that retained its tool & die DNA, is told by Kate Bachman, Editor of Stamping Journal, in the May/June 2017 issue of the magazine.


Miro Hosts Waukesha County Technical College’s Tool & Die Students

Students from Waukesha County Technical College’s Tool & Die program toured Miro Manufacturing’s facilities to experience how their education will empower them in the world of manufacturing.


Miro Mfg Featured in Made in Milwaukee Section of Milwaukee BizTimes

Name change marks a new chapter in Miro's journey. That is the title of The Milwaukee BizTimes' Made in Milwaukee section which featured Miro Manufacturing in April. 

Sometimes a company will change its name to signal a desire to move in a new direction. In the case of Miro Manufacturing Inc. – formerly Miro Tool & Mfg. – the goal was to let people know about a shift that had already taken place.


Return to the News Page

From "Start To Part" Miro Delivers the Complete Solution

©2015 Miro Manufacturing, Inc. All Rights Reserved.
201 Sentry Drive, Waukesha, WI 53186
Phone: 262-549-6685 • information@miromfg.com